- 28th May 2013 at 12:58 pm #64766
I have already reflashed my board and connected it to the host. The ping action was successful and the debug stub was right. However, when I tried to connect the debugger to my board, it saied “Fail to connect ot linux debug target ‘169.254.5.244’ “Unable to connect to debug target at 169.254.5.244”. I found there was another post discribed a same situation as I faced at April and the author was Jialun_Liu, but the result seems not good. I runned all the commands adviced him to run, and got almost the same results as him did. It seems everything was right and I can ping the board which means the connction was successful. Could you please help me about this?28th May 2013 at 3:57 pm #64769
You can ping from your host to the board?
Could you run ifconfig on your host and on the minimorph and post the results here?28th May 2013 at 11:00 pm #64768
Hi Alastair, I have already fixed the problem. The reason is , I pinged minimorph form the minimoroh terminal instead of host. So, I thought I ping successful but actually I didn’t ping at all.29th May 2013 at 8:24 am #64767
Glad to hear you are up and running.
Forums are currently locked.