- 11th March 2013 at 12:41 pm #64821
How to port Free RTOS on HTP 221 ( MInimorph )
Plz help 🙂
Saurabh12th March 2013 at 10:17 am #64841
Welcome. Hope you don’t mind but I have a few questions so we can best help you.
Are you doing this as part of a project or is this for your own interest? Do you have a Minimorph?
Have you worked on this kind of platform before?
Sean.18th March 2013 at 1:42 pm #64840
Thanks Seanr ,
I am doing for my own interest.
I have Minimorph ” Meta HTP 32 bit Xenif TZ`090 soc ” and FreeRTOS 7.4.0.
I have worked on OMAP4460 board with Kernel 3.0.31 and Jelly Bean.
But Here I dont know from where to start.
Thanks & Regards
Saurabh18th March 2013 at 4:09 pm #64839
Documentation, distribution and tools to get up and running with Linux on the dev board are available on our website: https://www.imgtec.com/meta_insider/metaflow-sdk.asp
I have a suggestion, I’ll send you a message off-board.19th March 2013 at 9:25 am #64838
I went through all the documents given by this link….
I am able to build MetaLinux
But Not FreeRTOS !!!!19th March 2013 at 9:27 am #64837
Sure, I’ve emailed you on the address you registered with.19th March 2013 at 9:37 am #64836
Ohhh Thank you very Much Seanr 🙂20th March 2013 at 10:13 am #64835
Have you sent mail to me …20th March 2013 at 10:13 am #64834
I sent it Monday night, I will resend.4th April 2013 at 5:18 am #64833
Which controller is used in Minimorph ” Meta HTP 32 bit Xenif TZ`090 .
It is Important for bringing up FreeRTOS.4th April 2013 at 1:48 pm #64832
When you request information about the controller, which controller do you mean?4th April 2013 at 2:51 pm #64831
By the way, today we have released the TZ1090 TRM, available to download from https://www.imgtec.com/meta_insider5th April 2013 at 8:38 am #64830
I mean FreeRTOS supports 33 architectures.
located as FreeRTOS/Source/Portable/[compiler]/[architecture] sub directories
where [compiler] and [architecture] are the compiler used to create the port, and the architecture on which the port runs, respectively.
and I anm not able to find any arch there in FreeRTOS directory .
Is Minimorph HTP supprots FreeRTOS ?
Thanks again for TZ1090 TRM.
But I didnt get any TRM on this link.
Please send full path .
SAURABH5th April 2013 at 9:04 am #64829
FreeRTOS has not yet been ported to the Meta architecture so you will not find it there. It will be possible to port but will need additional hardware and debugging support to do JTAG level debug.
Click the METAFlow SDK link on that page for the downloads: https://www.imgtec.com/meta_insider/metaflow-sdk.asp
Sean.5th April 2013 at 10:18 am #64828
Thank you very much Seanr 🙂
You must be logged in to reply to this topic.